← SIA Blog

The solar quote checklist: how to read a quote before you sign

By SIA's founder, a former renewable-energy research scientist. We've noticed most quotes go wrong on the same nine points. Here is what we check on each.

A solar quote is built to look good: big savings number, small monthly payment, the costly terms in small type near the end. So you have to read it yourself. Here are the nine things to check, and the number each should hit.

The checklist

  1. Price per watt

    Total price divided by the system's watts: a $27,000 quote for 7 kW is $3.86 a watt. The reason that number matters is what sits inside it. The panels are a small slice of the price; most of what you pay is sales commission, marketing, financing fees, and overhead, and every installer buys the same panels at close to the same cost. So when one quote is $2.60 a watt and another is $4.50 for the same gear, the gap is not better equipment. It is sales load, and it is either negotiable or a reason to walk.

    So find where your number lands. In PG&E territory, $3.10 a watt was a good price last year and $3.97 was typical. The solar-only quotes homeowners send us run about $2.60 to $4.50 a watt before incentives; add a battery and they run about $3.45 to $4.60. Only compare a quote against others of the same kind.

    Red flag: a number well above your area's going rate, or a rep who keeps steering you to the monthly payment and will not put the price per watt in front of you.

  2. System size against your usage

    Size to the power you use, not the roof. Under NEM 3.0 and similar rules, power you export earns about a quarter of what you save by using it, so every panel past your usage sells cheap. Check the usage and bill the quote assumes; the whole savings claim rests on them, and an inflated bill makes any system look good.

    Red flag: a system much larger than your usage, or savings built on a bill higher than yours.

  3. How you pay: cash, loan, lease, or PPA

    Cash or a loan means you own the system and keep the incentives. A lease or PPA means a company owns it, keeps the tax credits, and sells you the power. That can work, but judge it on one number: your monthly payment against your monthly savings. If the payment beats the savings, you are paying to host solar. The 25-year total is built to impress; the monthly comparison tells you whether the deal works.

    Red flag: a pitch that leads with the 25-year total and goes quiet on the monthly payment.

  4. The escalator (leases and PPAs)

    Most leases and PPAs raise your payment every year, usually 2.9%, in one line near the end. Over 25 years that costs about $15,453, roughly 72% of the savings the system was meant to produce, and the identical first-year payment hides it. Full math here.

    Red flag: any escalator above 0%, especially one nobody points out.

  5. Hidden dealer and financing fees

    A low advertised rate like 0.99% is usually paid for by a dealer fee baked into the price, often 15% to 30% of the system cost. You never see it as a line item, only as a higher price per watt. Ask for the cash price and compare that against another installer's cash price.

    Red flag: a very low APR with no cash price offered.

  6. The incentives it claims

    Check every incentive the quote counts, because some are not yours. The 30% federal credit ended for owner-occupied systems after 2025, so a 2026 quote still folding in 30% is wrong. And a credit is not a discount; it only helps if you owe enough tax to use it. Confirm any rebate or SREC actually applies to you.

    Red flag: a federal credit you were not independently told you qualify for, or a credit treated as money off the price.

  7. Who is actually installing it

    They owe you a 25-year warranty, so they have to still be there to honour it. Of the installers whose quotes homeowners have brought us, only one cleared every point on this list:

    • A clean, active licence and real insurance, including a bond.
    • Their own W-2 crews, not the cheapest subcontractor available that week.
    • A decade or more under one name; firms dodge bad reviews by re-registering.
    • A real NABCEP-certified installer on staff, not merely badges on the website.
    • Local enough to service the warranty, and no door-to-door, high-pressure sales.

    Red flag: a salesperson who will not name the licensed installer, or a firm younger than its own warranty.

  8. The condition of your roof

    If your roof is near the end of its life, replace it before the panels go on. Pulling an array off and refitting it later costs thousands and can wipe out the savings. A good installer raises this; a quote in a hurry does not.

    Red flag: panels on a roof with only a few years left, unmentioned.

  9. Get it in writing, and get three

    Get it all on paper: size, price per watt, equipment, warranty, financing, and every assumption behind the savings. Then get at least three quotes for the same system and compare them per watt. The gap between a first quote and a shopped one is often around $12,000 for identical work.

    Red flag: pressure to sign today, or a promise that is not in the contract.

Why this matters more in 2026

Until 2025, the 30% federal credit cushioned a bad price. It is gone for systems you own, so every dollar of markup now comes straight out of your pocket. In our PG&E study, a typical price instead of a good one added about two and a half years to payback, for the same panels.

You can run any quote through the Solar Design Studio free, or send it to us for a hand review. Either way, if none of your quotes is good enough, we will say so.

Questions people ask

What is the most important thing to check?

Price per watt. The same roof gets very different numbers, and with the federal credit gone every dollar of markup comes off your return.

What is a good price per watt?

It depends on your state and roof. In PG&E territory about $3.10 a watt was a good price and $3.97 was typical. Compare on price divided by watts, never the total.

Is a lease or PPA always a bad deal?

No, but check the escalator and compare the monthly payment to your monthly savings. A 2.9% escalator can cost about $15,453 over 25 years. More on quotes here.

Your next move

Two ways to check your quote

Do it yourself

Run your roof, or paste your quote

Model your own roof in 30 seconds on your utility's real rates, or paste a quote and see what it really says. No account, no phone number, and it never assumes a tax credit you were not offered.

Check my roof free

White-glove · free

Have us review it by hand

Send your address and your quote. A former solar-energy scientist reads it line by line and tells you plainly where it is fair, where it is padded, and whether to walk away. No sales calls, and we never sell your details.

Get my free review

Independent. Not affiliated with any solar company. We equip you and support you whenever you ask for it.